Electric parking brake problem Honda Civic owners report varies from one kind to another.
Although technology continues to move toward advancements, there are some issues that are observed along the way. Automobile manufacturers implement newer features in cars, which includes the electric parking brake. This offers a safer, more efficient, and a more improved braking system to the car. Hence, applying your emergency brake is even more convenient in certain situations.
Today, we will discuss what the most common electric parking brake problems are and what you need to know to get these sorted out.
Electric Parking Brake Problems With The Honda Civic
There are a few electric parking brake problems with the Honda Civic, which includes an indicator light malfunction.
As with all electronic components in vehicles, this problem happens when your wires or switches located between the module and actuator are shortened, damaged, or have developed high resistance. You may experience some low system voltage, as well as an open fuse, which results in the electric parking brake system malfunctioning.
The faults you may see displays a service parking brake notification when a fault is reported. You can use a scan tool or diagnostic tool to determine the failure’s primary cause. But more often than not, a failure with the actuator will require a replacement.
If the electric parking brake does not release automatically or manually, you may be having any of these issues:
- The gear stick or brake pedal switch is damaged
- Poor communication between the switches and the EPB module
- Jammed EPB motor
- Corrosion to the parking brake cables
Many Honda Civic car owners report issues with their electric parking brakes. Regardless of the problem, you can take a look at possible fixes to get your EPB to work as it should.
When you have a dirty or bad console parking brake button or switch, you need to make sure it stays clean. But sometimes, there may be spills or even food crumbs stuck in it. Thus, it can malfunction because of the debris.
You will have to first disassemble it then clean the area. Plus, a replacement of the switch may be required since it may no longer be functioning, so it is impossible to get the EPB to work.
As with a faulty wiring, this can also cause the parking brake to malfunction. You should inspect your connection if there is worn out or loose wiring found. Be sure the wiring in your center console, as well as the clips connecting the parts are in good condition.
And lastly, the caliper parking brake servo motor should be functioning well. This component enables the wheels to lock up when you activate the brake. But if your servo motor has gone bad, you would need to get it replaced. Thankfully, you should not have a problem replacing the motor even without taking it to the specialist. But if you lack experience in doing this repair work, you should take your vehicle to a professional instead.
Additional Things To Take Note Of
There are many reasons why your electric parking brake fails. It may be an issue with the module, actuator, and the wires or switches related to these components. You may also be experiencing an open fuse or low voltage in your vehicle.
With this in mind, it helps to reset your electronic parking brake to get it to work.
First, turn your ignition on and activate your electric parking brake. Afterwards, pull then hold and release your EPB button. These are the steps you need to take to perform the reset.
Now, when your brake warning light is not working, it can be unsafe since the motorists behind you are not aware of your situation. This is why you need to get it fixed whether it involves replacing your caliper parking brake servo motor, wiring, or the console switch. Also, a reset to your EPB system may be necessary, which is performed by turning your ignition on and putting the gear shift to the park position.
Afterwards, you can activate your EPB as you pull and release the button. Pulling and holding the button until you hear the mechanical beep should mean you may release the button already.
An electric parking brake uses an electronic type of system that enables the vehicle to stop the moment you pull your EPB button. With the help of an automated brake system, this increases the accuracy and efficiency of your EPB, as compared to the traditional emergency brake system. This also ensures an optimal performance of the brake on the rear and front wheels.
Aside from the effectiveness of your EPB, there is also the Hill Start Assist feature that helps to apply the brakes on your rear wheels when you are on a sloppy road. This helps to prevent rollbacks.
Some people wonder why they are unable to release their parking brake. The most common reason for this is corrosion. Water and dirt combined can cause corrosion on your brake system, which can snap the brake cable or cause the parking brake to fail. Thus, you will have to prevent corrosion by keeping these areas clean and dry.
When you encounter a problem with your electric parking brake problem on the Honda Civic, be sure to know how to reset it. Otherwise, you can also consult a specialist to find out how you can repair or replace affected components that are causing this system to fail.
Read More: Honda Civic Trunk Not Opening? Reasons And Solutions To Consider
Final Thoughts
An electric parking brake problem Honda Civic owners encounter can be concerning because of the safety risk involved with it. But most importantly, it is an inconvenience since you rely on this innovation for quick braking functions when need be. Thus, you need to get this issue resolved immediately when you encounter some symptoms of a problem to prevent it from getting worse and becoming beyond repair.