Eaton Inertia Brake Problems That You Never Knew

Eaton Inertia brake problems are not uncommon. These are just some of the things that you need to keep in mind as a car owner.

After all, you need to be prepared for certain issues coming up with your vehicle at one point or another. And this includes brake problems, which is why brake servicing is considered as a basic part of car maintenance.

With all of the immovable and movable components of your braking system, it is safe to say that this part of your vehicle has quite a limited lifespan. Hence, it is very important to get this system renewed or repaired to make sure that you stay safe on the road.

So, what are these common brake issues? Today, we’ll discuss the common symptoms of Eaton Inertia brake problems and what you can do about these. Let’s get started.

eaton inertia brake problems

Signs Of Eaton Inertia Brake Problems

Over time, some parts of your vehicles are expected to break down. This is all just part of your vehicle’s lifespan. With this in mind, it helps to be aware of the signs involved with some car part issues, which includes the brake. 

So, what exactly are these common symptoms of brake problems? Here are just some of the most typical ones that you need to know.

1. Dashboard lights

It is important to note that the lights on your dashboard are not only there to warn you if there are irregularities with your engine. These lights also give you an insight on the car’s electronic system and have something to tell you about the Electronic Control Unit of your vehicle. This is why if you see that your light board lights come on, you may need to have the ECU and braking system checked by a mechanic.

2. Metallic squealing noise when driving your car

Another thing to pay close attention to when you are driving your vehicle is the strange metallic noise that is almost like a piercing sound that only stops when the brake is applied. What this means is that the brake pad is starting to wear, which is why you need to take action the moment you hear this. 

As you know, the brake pads are crafted out of steel, which is why this sound is produced when contracting the rotor but even without applying the brakes. Thus, if you hear this concerning noise, it is most likely that you have worn out brake pads, which require a replacement. You need to get this done sooner than later before rotor damage happens. Otherwise, you are up for a more expensive fix in the future. 

It is also worth noting that this issue is the most typical braking problem you should never ignore.

3. Grinding sound when you apply your brakes.

Aside from a metallic noise, you may also want to check for any grinding sound that you hear on the pedal. But it is not always a cause of alarm since sometimes, this grinding noise may be due to gravel, or perhaps there is stone or pebble caught in your caliper unit. In this case, it should be an easy fix. 

However, if you are certain that it could be a worn brake pad issue, then it is likely the reason why this metal noise can be heard. This is why you should get your brakes checked by a specialist.

4. Squealing or vibrating while braking

Do you notice some kind of a vibration or shaking in your steering wheel when you apply your brakes? Upon hitting your brake pedal, the pads touch the rotors and slow the vehicle down. But due to heat, wear and tear may occur, which causes the piston to get tacky. It may also fail to retract your pads into the off position upon letting up on your brake pedal.

5. Signs of leaks

Additionally, you may want to inspect for signs of leaks from your master cylinder or literally anywhere in your brake framework. Soft brake pedal issues can often be attributed to fluid leaks, which is why it is pertinent to get this problem inspected closely. 

Your master cylinder serves as a unit creating force for the brakes. It comes with a reservoir just like what you have for the wiper fluid, and it holds the brake fluid. Upon applying your brakes, this pushes the fluid through a thin piping that creates hydraulic weight. In case there is fluid leaking from this tank, it is possible that it is unable to cause your brake pads to cling to the rotors.

Other Issues To Observe

Sometimes, there are other issues that may arise such as your brakes sinking lower to the floor each time you step on the pads. Ideally, it should not go lower than 3 inches, otherwise, you need to get your brakes checked by a specialist sooner than later. 

Moreover, you may want to observe if there is a burning smell that permeates from your brakes. A chemical odor that is also quite pungent is never a good sign. When you brake hard, especially on steep inclines, it could mean that your caliper or brakes could be overheated. Thus, you may want to let the brakes cool off by pulling over in a safe place as soon as possible. 

Otherwise, if you also see smoke from your wheel, it is possible that the brake caliper is stuck, which is why you should never drive your vehicle if this happens. 

And lastly, a partial or even a complete brake failure may arise, which is why you need to get the braking system checked immediately. It is likely that the brake pedal is jammed completely, so it is dangerous to keep driving.

Read More: 245 Vs 275 Tires – Key Differences You Need To Know


Your vehicle’s brake components wear out over time. So, it is essential to get your brake serviced by a specialist instead of continuing to drive when signs like these happen. This is the best thing to do to not compromise your safety, as well as other motorists on the road.

Leave a Comment