Is your Honda civic windshield wiper fluid not spraying?
When there is no water coming out of your windshield wiper, it can be a bit of an inconvenience. After all, you need this component to work when you have some dirt on the windshield and want to get it cleaned up.
This is why if you are concerned about this problem, you may want to keep reading to know how to get it straightened out. Here is everything you need to know how to fix a windshield wiper fluid that is not spraying and what can be done about it.
Causes Of A Honda Civic Windshield Wiper Fluid Not Spraying
For the most part, you may not have a windshield wiper fluid spraying properly when you have run out of water.
However, if this is not the case, and you have refilled your wiper fluid, yet nothing still comes out, then there are a few reasons why this happens.
1. Insufficient washer fluid
Your first thing to check is the reservoir. Perhaps, there is an inadequate amount of fluid in there, which is why it is not spraying. An average windshield washer tank can hold as much as 3 quarters up to 1 gallon of your windshield washer fluid. This is about 2.5 up to 4 liters.
You need to have enough windshield washer fluid to make sure your glass stays clean. But at the same time, you can rely on the fluid to be able to see clearly when you drive in heavy snow or rain.
This is why you need to make sure that your washer fluid is topped up. Otherwise, you will have to deal with a Honda Civic windshield wiper fluid not spraying.
2. Clogged hose or nozzle
If you are very much certain that you have just refilled the fluid – and you have a full tank of fluid – then there may be a clog in the hose or the nozzle. This is another reason why you are unable to spray fluid since the pump is prevented from pushing fluid through the nozzle or hose and onto the windshield.
There are a few things you can do to unclog the nozzle.
First, it requires using compressed air in blowing away debris. Hold your can of compressed air and point it right at the clog. Then, spray it continuously until it has loosen the clog.
This will help with clearing out build-up, as well as any dirt that comes loose over time. You may even make it a regular thing to maintain the nozzles and prevent clogs and build-ups.
Another thing you can try is cleaning the nozzles of your wiper fluid. A typical sewing needle should do the work since it is small and can fit the nozzle hole really well. Simply push through the clog to clear it out.
And lastly, you may want to inspect the windshield washer hose. When there is a tear to it, this causes the fluid to not spray freely.
3. Blown fuse
When you have checked the steps above, yet your Honda Civic windshield wiper fluid is still not spraying, then it may be that the washer pump’s fuse is damaged. Do keep in mind that your electrical accessories are all protected by fuses. This prevents electricity overload and shorts.
Once the wiper fuse is blown, then the wiper fluid will not be able to come out of any of the nozzles. Thankfully, you should easily replace the fuse in just minutes.
For this, you need some tools such as the replacement fuse with the same amperage as the old one, fuse puller, and a test light.
The first thing to do is locate the fuse using the owner’s manual. Check the fuse with a circuit tester once you have found it.
Then, remove the damaged fuse and replace it with the right kind. If you use a 15-amp fuse, then you have to buy the same kind for a replacement. But if it blows again, you have to replace a part in your circuit with something that is compatible with the fuse rating you are using.
Once you have replaced the fuse, test it once more. Turn your wipers on and spray fluid to check if everything is functioning perfectly well. Otherwise, the spray pump needs to be checked.
4. Washer Pump motor damage
Your pump is connected to the fluid tank. When the washer pump motor fails, then it will not work even when activated by your switch. One way to tell if the pump is the culprit is by checking the motor. If it is running, yet no fluid comes out, then the pump is the culprit.
Check the washer pump and attach your test light clip. When the washer nozzle is turned on, probe the back portion of the connector on your pump. If you are able to verify a supply of power, then the motor will have to be replaced. You can do the replacing yourself or have an expert do this job for you.
Read More: Honda Accord Usb Port Not Working – Expert Guide To Help You
Conclusion
When fixing a Honda Civic windshield wiper fluid not spraying, it requires checking a few items such as the reservoir whether it is full or not, if there is a clog to the nozzle or hose, or if there is damage to the fuse, motor or the switch.
Once you have done the diagnosis, you can perform the required troubleshooting techniques to make sure your windshield wiper fluid works once more as it used to. It is important to get this component to work as it comes in handy when driving in the snow or rain or when you need to clean the windshield and remove any dirt or debris.
We hope this post has been valuable for you, so you can get your windshield wiper fluid spraying and performing normally.