Hyundai Sonata Backup Camera Blue Screen – Practical Tips You Can Do

So your Hyundai Sonata backup camera blue screen has been bothering you for a while now.

You may be wondering what’s gone wrong with your camera and what can be done about it.

Well, if this is the situation you are dealing with, it may be worth looking at this backup camera blue screen problem and what can be done about it. Let’s get started!

Hyundai Sonata Backup Camera Blue Screen Problems

“Why is my backup camera not working?”

This is a question we hear from some friends who experience problems with their backup cameras on their Hyundai Sonata.

Does it need replacement, you may ask? Well, it depends. You may need to conduct a few tests and some tinkering to get you to the bottom of things and understand the best solution to this problem.

First of all, check the supplier’s manual and make sure that you have really installed and set up the camera correctly.

Another thing you can do is by checking the wiring connection. Sometimes, poorly attached wires can result in such black screen problems. With a poor connection, this prevents the unit from getting the right amount of power it needs to work.

But if you tried all of these and the blue screen persists, then there is possibly damage to the monitor. Hence, a replacement is your last resort.

Read this post: Are Hyundai Warranties Transferable? Things You Need To Know

Final Thoughts – Additional Techniques You Can Do

Now, a blue screen backup camera can be concerning to people. It may either be that the image is blue but with some text or none at all.

If you have an overlay, it’s not good news since the camera is bad and malfunctioning. So, you will have to get a replacement.

There are cases, however, that you may only need to take the camera apart and do some cleaning. Sometimes, the housing can be dirty, so a simple cleanup with 99 percent isopropyl alcohol and Q-tips should help in the case of corrosion in the unit.

But it is very delicate to do, which means you have to be very careful when doing this to prevent further damages.

In other cases, there could be a need to lubricate the interior, which you can do by using a multi-purpose synthetic grease. It is ideal for high temperature while providing a water resistant quality to it. This should help to remove and prevent rust, which could be causing the malfunctioning on your camera.

We do, however, advise against doing these unless you have some electronic know-hows since you are dealing with a delicate unit when you take it apart and do some cleaning in the interior.

Hence, contacting a specialist can help solve this issue; otherwise a new camera may be necessary if all things fail in bringing the unit back to proper working condition.