Hyundai Elantra Backup Camera Not Working – Common Causes And Expert Solutions

Worried about your Hyundai Elantra backup camera not working?

This can be a big concern since you rely on your back up camera for a number of tasks such as ensuring proper distance with other vehicles, during parallel parking, and making sure you keep accidents at bay while on the road.

Unfortunately, there are cases that the backup camera works intermittently. In other times, it may fail to function at all.

No matter what the issue, the following tips may be worth looking into. Then, you can address the problem once and for all.

hyundai elantra backup camera not working

Hyundai Elantra Backup Camera Not Working

Do Hyundai backup camera problems get you concerned about your vehicle? Not sure how to deal with it and get it fixed?

There are many possible issues that can happen to your backup camera. For instance, there is no signal at all, the screen is black, or there are blurry images to the camera. If this is the case, you may want to start with some troubleshooting work yourself to see if you could get it to work this way.

However, if the issue is significantly difficult for you to address by yourself, then a professional’s help may be necessary. It is only a matter of knowing what you can and cannot solve.

Thankfully, many backup camera troubleshooting steps are not always complex. You should be able to diagnose the problem yourself and often without not much time or energy on your part.

Take a look at the following problems with backup cameras and what you can do.

1. There is no signal in your backup camera.

If you turn your camera on, and you see that there’s no signal at all, something could have gotten wrong with your fuses.

Before you throw in the towel and decide it’s time to buy a new camera, it may be worth looking into the potential reason behind this issue – and how you can fix it.

For instance, consider the type of backup camera you have. If it runs on wifi and was working well previously, there’s a possibility that a simple reset is all it needs. This is a typical issue with wifi cameras.

On the other hand, if this does not solve the problem, you can try checking the fuse. It may be that there is a blown fuse or some frayed wires. The camera’s fuse and cables are usually found behind your car’s trunk panel, so you may want to check these components out.

In the case of frayed wires, you may only need to replace them and reconnect, which solves the issue pretty quickly in most cases.

Wired cameras are a little less complex. For the most part, the “no signal” problem occurs because of poor wiring conditions. Check the wiring and the fuse to make sure all the components are connected and are not in a bad shape.

If the display is embedded right on the dashboard, check the camera first before working your way to the display. The last resort is to remove your dashboard display since it’s more complicated and painstaking than inspecting the camera at first.

But one thing we would like to emphasize – always begin with a system reset before you troubleshoot the wiring. Oftentimes, a reset is all it needs because of a glitch.

2. Black And White Camera Display

Aside from having no signal, your backup camera may be producing a black and white display instead of the normal quality.

If this is the issue you are getting, then you may want to inspect the wiring condition. Some faulty connections or fraying wires are common culprits behind this black and white display in your camera. Thus, you should consider repairing these damages and reconnecting to solve this concern.

3. The display is completely black.

Now, this is another issue that some people may be having with their Hyundai Elantra backup camera. Having no image but just a plain black screen can be concerning.

In most instances, this black screen display issue could mean the unit is not set up the right way. You may want to re-install by referring to your instruction manual. Sometimes, this is all it takes to get your camera to work instead of buying a new one right away.

Read this post: What It Means When Hyundai Elantra EPS Light Turns On

Should You Buy A New Camera When It’s Not Working?

It depends. We recommend that you go through the steps we have just shared with you to troubleshoot an issue with the Hyundai Elantra backup camera not working.

As we have stated earlier, it may be a poor connection issue, or the wiring is frayed, or you simply need to reset the unit. If there is no damage to the actual unit, then it may be possible to proceed with these troubleshooting techniques to get it to work well.

We hope we have helped you with your concern from the tips we have just presented. And if all else fails, it may be time to buy a new camera – but only after you’ve tried these techniques.

2 thoughts on “Hyundai Elantra Backup Camera Not Working – Common Causes And Expert Solutions”

    • Hi Christopher,

      The cost of a rearview camera for a 2021 Hyundai Elantra can vary depending on several factors such as the type of camera, whether it is an OEM or aftermarket camera, and the installation costs.

      If you are interested in purchasing an OEM rearview camera from Hyundai, you can check with your local Hyundai dealer to get an accurate estimate of the cost. The price may also vary based on your location, as well as any discounts or promotions that may be available.

      Aftermarket rearview cameras are also available, and they can be less expensive than OEM cameras. However, you should keep in mind that the quality and compatibility of aftermarket cameras can vary, and you should only choose reputable brands that are compatible with your specific model and year of Elantra.

      In general, the cost of an OEM rearview camera for a Hyundai Elantra can range from $150 to $500 or more, depending on the specific camera model and installation costs. Aftermarket cameras can be less expensive, ranging from $50 to $200 or more, depending on the brand and features.


Leave a Comment