Hyundai Wireless Charging Pad Not Working – Reasons And Solutions

Some people encounter issues with their Hyundai wireless charging pad not working. When this happens, it can be a huge inconvenience, especially when you need to charge your devices’ batteries.

But if you come across this issue, you are not alone on this. Moreover, it is possible that this is not caused by a broken wireless charging pad. Your phone’s wireless charging capability is also not to be blamed.

And surprisingly, it may be a cosmetic or even a structural issue.

So, why does this problem occur, and what can you do about it? Keep reading to learn more.

hyundai wireless charging pad not working

Hyundai wireless Charging Pad Not Working – Why This Happens

When you need to charge your device wirelessly, there are a few things you must know to get things to work properly.

Here are those three things to make sure that everything works seamlessly.

1. Proper Alignment

The first thing you must know when you charge your mobile device wirelessly in your vehicle is to make sure that the charging pad aligns with your device’s receiver. This is very important to ensure proper charging since problems exist otherwise.

The transmitter is hidden underneath the charging pad. This nickel-sized component sends out electromagnetic waves that allow your device to receive power. In most cases, there is a round-shaped portion on the charging pad’s center. This portion must come into contact with your phone where your receiver is found. 

It is typical for receivers to be built right into the hardware, especially in the case of phones with a wireless charging feature. With this design, you can simply put your phone on the wireless charging pad and charge the battery. 

On the other hand, if the device is not aligned to the wireless charging pad, then you will not be able to charge your device. 

2. Wireless charging pads are not created equal

You also need to know that wireless charging pads vary. The same holds true with smartphones as not all devices are created equal, which impacts the way you charge them.

For instance, there are small, big, wide, or narrow wireless charging pads. This is why you may be unable to charge your device because the pads do not touch your smartphone and vice-versa. 

It is also worth noting that some smartphones do not come with a receiver that allows for wireless charging. When the device does not fit properly with the charging pad, then it is impossible to do wireless charging.

3. Your phone needs to have a wireless charging capability.

And most importantly, are you certain that your device has a wireless charging capability? If not, then you cannot expect charging to take place. This is why you should check the specifications of your device very well to prevent any inconvenience when it comes to charging it.

Additional Information You Need To Know

When using your wireless charging pad to charge your smartphone’s battery, the primary thing to note is that the device should be aligned properly on the charging pad. The transmitter coil is unable to bear any distance no matter how small it may be. In fact, just being a bit off-field does not allow your battery to charge.

In your Hyundai vehicle, the wireless charging pad requires proper alignment or it will prevent charging to take place. In some cases, your device may be a bit too large, which prevents it from lining up on your charging pad. 

With these things in mind, you should re-position and track your device until it starts to charge. 

Another thing worth trying is removing your phone case. If you encounter an issue with charging your device, you may need to reposition your device once you have taken it off of its case. In most instances, the material in the outer cover generates an interference in its magnetic field, which creates an on-field disturbance. Hence, this prevents signal transmission from the TX to the RX coil.

Next, there is the issue with a low charging efficiency. If your device’s operating system requires 5 watts to charge, it can take about 60 percent longer to charge the battery, unlike when you use a cable for charging. 

There is another concern with this situation. The EMP requires a bit more time for it to transfer the signal from the TX to the RX coil. Thus, the charging speed is reduced unlike with the conventional charging system.

With this in mind, you can use a wireless charger with 10 watts up to 15 watts. By increasing the wattage, you can also boost the charging efficiency. 

Another pro tip you can try is by turning the airplane mode on your phone prior to placing it on your charging mat. By doing so, you can guarantee a faster charging speed without any issues linked with external waves.

Read More: Hyundai Forward Collision Avoidance Assist Not Working? Consider These Tips

Final Word

There are many benefits that a wireless charging pad offers. However, with a Hyundai wireless charging pad not working, this can get quite frustrating and even annoying because of the inconveniences that come with it. 

We hope that after learning more about the potential issues linked with this problem, you were able to discover the best course of action to take that can resolve these concerns correctly. Then, you can charge your device without any problem and avoid any inconveniences along the way. 

Leave a Comment

Read more