Been wondering how to do a Hyundai emblem replacement? If so, then you have come to the right place.
Changing your Hyundai’s emblem is actually a fairly easy thing to do. This is possible with just a few, basic tools, and these easy steps that we have shared with you below.
So, if you are ready to get started, check out these tips on how to remove Hyundai front emblem and get it replaced in no time!
How To Do A Hyundai Emblem Replacement
Emblems are used for identifying any vehicle’s model and make. However, there are instances when you may want to replace it when the emblem has become damaged or old. Hence, a need to do a Hyundai emblem replacement is in order.
So how exactly do you do this?
Here are some steps you need to take.
1. Remove the old one.
This is something you can easily do using a heat gun set on the lowest setting. With this tool, it can loosen the attachment to the surface, which will then allow you to easily pry it off using a putty knife.
2. Clean the surface.
With the old emblem gone, you can now clean the part where you want to affix the emblem. Sometimes, a simple adhesive cleaner should work while others may want to use a specially-formulated one. Then, use a rubbing alcohol to further clean the area and remove some dirt or grease that got stuck on the area. Then, let it dry well.
3. Mark the area.
This is a crucial step since you need to make sure that you are able to attach the new emblem correctly. You will need a level, as well as a painter’s tape to mark the area at the bottom and top of the emblem. Since you only have one chance to place the emblem, you want to make sure you do it right by keeping it straight.
4. Prepare your emblem.
There should be some kind of an adhesive at the back of the emblem, so you need to remove first the tape that will expose the section you will use for attaching it to the prepared area. In some cases, an adhesive is required to be applied to the back. If this is the case, you need to clean the emblem’s back portion well to make sure there is no dirt stuck in between it and the surface.
5. Place the emblem.
Following the mark you have made earlier, you can now affix the emblem onto your vehicle. Hold it in place for a few minutes just to make sure that it bonds perfectly well.
A Hyundai emblem replacement should be an easy task to do. However, if you end up getting it wrong, you can simply pull the emblem off and fix it up by adding more adhesive. Then, you can wipe it off for a clean and polished look, and it’s ready to go!