Honda Civic Screen Not Working? Expert Tips To Try!

Having a Honda Civic screen not working can be frustrating.

Although there are many high tech features in your Honda Civic, some technical issues may come along at one point or another. This includes the display or screen not working as it should.

For the most part, a simple reset should fix this concern. This would mean locating your power button, then you need to press and hold it for about 10 seconds, and it should be reset. But if this does not help at all, you need to explore other solutions.

We will discuss what you should do with a Honda Civic screen not working so you can continue to enjoy the amazing features it has to offer. Let’s dive right into it.

honda civic screen not working

How To Fix Honda Civic Screen Not Working

There are a few common issues linked with the Honda Civic screen. For instance, you may not see any information displayed on your dashboard. If this is the case, you need to perform a hard reboot on your screen. You can do this by tapping the power button on the center console and holding it. 

Do not let go until you see a message asking if you would like to reboot the device. Choose the yes option and the screen should shut off. You need to wait a bit until the unit is online once more. Check the display on your dashboard, and everything should work normally.

However, if the information display does not work, it is most likely blank. Changing radio stations is not possible, as well as altering the car’s temperature and using your reverse camera. Therefore, you may encounter hassles in your drive.

But before you go straight to your dealership, consider resetting the console first. Be sure to let your unit finish the reset process and this should enable your screen to work properly. But if this is not the case, there may be other issues involved. One thing to look into would be your fuses. Check if the fuse is not blown. A fuse replacement may be needed if it appears to be blown or damaged.

Additionally, your circuit board may have some broken pins. As a result, the display is unable to show the full numbers and letters. Or in other cases, there may be no display seen at all. Just remove your display, then solder your pins, and everything should be back to normal.

Do you notice that the screen is frozen? This happens due to a number of reasons but an effective solution to this issue is by doing a hard reboot of your head console. By doing a reboot, this will reset your software and make sure that your display works properly once more. To reboot, just tap and hold your power button and follow all of the prompts shown in rebooting.

There are cases, though, that your screen does not enable you to perform a hard reset. If so, you need to take your car battery out and leave it as is for a few minutes. Afterwards, you can put it back in and reset your head console. This should work properly and fix your issue with a frozen screen. But if this does not solve the problem, you will need to contact your dealership for professional assistance.

Another issue commonly experienced by some owners is that the screen tends to dim. The brightness level may also adjust by itself, which can be quite annoying. Now, it does not mean your vehicle is malfunctioning. The sensors are designed to become dim based on the lighting in your vehicle. It may also occur when there is a lower visibility outside. So, it is perfectly normal.

Do you notice that the display flashes a lot? If so, there are a few things you can do. One is to do a hard reset of your head console. There may be some bugs that need to be worked out, which a hard reset can fix.

Next, your display may have some malfunctioning bulbs. The only solution is to replace these bulbs, which can be done at your dealership.

Other Fixes To Try

We have heard of owners complaining about their radio display simply fading. This usually happens when the weather is very cold. But after a while, the display will look normal. Yet, if this doesn’t get resolved after a while, you may have a wiring issue. This is why you would need to take the display out, clean your wiring using WD40 and it should fix the issue.

If you are unable to see the mileage display correctly, this can be a nuisance. You want to see it to determine your vehicle’s overall health and performance. But if it appears to be blank, you just need to take the battery out that should also reboot your odometer. The last resort will be to take your vehicle to your dealership if this does not resolve the issue.

And there are folks who complain about their display not being the color they prefer. If you want to change your display’s color, you can do so by locating the main screen on your center console. In the settings, select “systems” and scroll through the options available including background color. From this section, simply choose the color you prefer and it should change your display’s color.

Read More: Causes And Fixes For A Honda Civic Bad USB Device


These are just some of the common problems that people encounter with their Honda Civic screen. There are times when a simple reset or hard reboot should fix the issue. But other cases may be quite serious, which would require a professional’s assistance. So, do not hesitate to take your vehicle to a dealership for the best solution they can provide to your concern. It is always better to have an expert address the issue if you have already exhausted all of your ideas and troubleshooting techniques to have the problem fixed once and for all.

Leave a Comment

Read more