What Are The Usual General Lee CB Radio Problems (And Common Fixes)

General Lee CB radio problems are not unusual. In fact, a number of people may experience these issues at one point or another.

But thankfully, there are always solutions to these issues. It is all a matter of knowing what to do by identifying the cause, then you can apply appropriate techniques to troubleshoot the problem.

So, if you are looking for ways to fix your General Lee CB radio issues, keep reading to learn more. We are here to share with you some reasons why these problems arise and what you can do about them.

general lee cb radio problems

General Lee CB Radio Problems

First of all, let’s talk about some problems that you may encounter with your General Lee CB radio.

For instance, there are those who complain that the LED and the meter are not bright enough even when on high. There were also issues with the unit producing a squealing or humming sound, which can be a source of annoyance. 

Moreover, there is the concern with turning the V13 high power lower than 5 watts to eliminate the squeal or hum. 

One thing to note about this issue is that the humming sound may be power-related or something ground-related, which can be caused by the antenna or the radio. If so, then it may be possible that this issue arises because of an amplified microphone you are using. This sometimes results in a squealing or RF feedback effect. 

Other Common General Lee CB Radio Problems

other common general lee cb radio problems

In addition to these issues, there are a few other concerns that one may encounter with the General Lee CB radio. These include no power to your CB radio, which means there are no sounds, lights and basically the unit is unable to receive or transmit any signal.

If this is the case, you may want to check your power cord connections and be sure everything is correctly attached. The power plug should sit well to ensure the connection you need.

Additionally, you may want to inspect the fuse. Sometimes, when there is no power to the radio, it could be linked to a blown fuse. The in-line fuse for your radio’s power cord should also be in good condition. Otherwise, you will not be able to power it on.

Other things you can check include the power, which should be switched on. This is usually paired with your volume knob. Once you hear that audible click sound when you turn the knob clockwise, the power should be on.

And lastly, the battery should be working. Moreover, be sure your extension wire and fuse panel are all connected to your battery securely.

Channel Selector Is Non-Responsive

When there is no change applied to the channel even after turning the selector knob, you can try a few options to get things to work. For instance, you may need to disengage your 9/29 switch, since this instant channel switch can cause some issues with the channel selector.

Additionally, you need to turn the weather operation mode off. Having this option turned on can impact the channel selector’s function.

No Channel Light

Do you notice that the channel light stays dim? Although you may be able to hear a sound, and you can transmit or receive, the channel light remains off.

If this is the issue you are facing, then you can check the power cord connections. These should be attached properly, especially if the unit comes with a power plug.

The fuse should also be in good condition and no signs of damage to it. And the ground connections and power connections should all be secured properly.

And lastly, be sure the dimmer switch is not turned off. Otherwise, the channel light is not visible. 

Weak Transmission

In the case of a weak or intermittent transmission, you may be wondering why this happens at all. Perhaps someone right on your frequency listens, and yet will not pick you up. If so, you need to make sure that the switch is toggled in the CB position if you have a PA feature for your radio. 

Furthermore, the power cord connections, as well as the coax and CB antenna are both connected well. Tightly screw them in and have your weather protectors positioned correctly. 

Then, press your CB mic PTT button. Have this piece all the way in, and you need to have the CB mic plugged in as securely as possible. There may be damage to your plug or cord, so be sure there are no issues that can impact the functionality of the unit. 

Read More: Practical Guide On How To Keep Subwoofer From Draining Battery

Bottom Line

Some General Lee CB radio problems may come along at one point or another in its lifespan. However, by determining the cause and actual issue you are encountering, you will be able to perform the right troubleshooting techniques that can solve the problem and get your unit to work as it should.

Leave a Comment