Why is it important to know the Dodge Ram ground strap locations?
You may be wondering about the location because of an important enhancement you are planning to do with your vehicle. Perhaps you want to install a new stereo system and are trying to avoid problems.
Knowing the location of the ground strap is important for this purpose. The factory system comes with two ground straps. One is found at the rear while the other is at the front part of your engine. So, if you wish to add another system, you should also put additional ground straps. By doing so, your new radio gets ample power required.
When it comes to knowing the location of these ground straps on your Dodge Ram, this post should help you find them. Let’s dive right into it.
Dodge Ram Ground Strap Locations
As we have mentioned earlier, there are a couple of ground straps on your Dodge Ram. One is found on the engine, specifically on the left portion close to the firewall.
Then, there is a frame ground strap, and this is underneath your vehicle, in proximity to the rear axle. These are two important ground straps that will ensure the proper and smooth performance of your Dodge Ram. So, if there is damage to either of these straps, you may experience various issues with your vehicle.
With that being said, you need to keep these in good condition. And the first thing to do, so you can achieve this is by determining the location.
If you wish to know where the engine ground strap is, first you need to locate the engine block. This is usually near your battery, and that is where you can find your engine ground strap. This is useful for providing proper connection required for your electrical system.
Now, your vehicle’s electrical system relies on your ground straps. They allow for the proper dissipation of static electricity, which then prevents any voltage spikes that can cause damage to electronic components – particularly the ones that are more delicate than others.
If there are no ground straps, then your electrical system is always at risk of issues. This is why ground straps are very important. They set a conductive path between your chassis and engine. These straps are also crucial for protecting electronic components from wear and tear as there is a low resistance path provided for the flow of electrical current.
It is important to note that issues among Dodge Ram trucks are quite common. One of these most typical issues is with the electrical system’s grounding. Therefore, there are various problems that may occur such as electrical shorts, intermittent starting problems, and stalling of the engine.
More often than not, these issues arise because of inadequate factory ground locations. These are typically not enough for the alternators with a higher output, which are typically used in trucks.
With that in mind, you need to install more grounding points. This is crucial for ensuring the vehicle’s proper and smooth operation. There are a few ways to do this, yet the most ideal one is by installing a chassis-mounting kit, which is of course aftermarket. By doing so, you can provide more grounding points for your vehicle, which improves the electrical system’s overall performance.
Thus, you need to inspect the current grounding situation with your Dodge Ram truck when electrical issues arise so often. It is possible that this is to blame. While it may require some work to do this, you can definitely get rid of such problems and drive your vehicle trouble-free for years to come.
When it comes to the 2012 Ram 1500, the ground locations are typically near the battery, or under the hood. You can also see a ground cable running from your engine all the way to the truck’s body. This prevents your electrical system from overloading. Be sure to check the frame of your truck as there is also a ground point here that reduces risks of rusting and corrosion.
There are quite a few Ram 1500 ground points – and these are all throughout the vehicle’s frame. Some can be found on your transmission, engine block, and firewall.
As for the 2013 Ram 1500, it is important to know the ground locations to determine the right way for placing the jack. There are typically four in total – two can be found behind the rear wheels and another two would be in front. When you have found metal plates stamped with “J”, you can place your jack over each one. Then, you should be able to lower or raise or truck as required.
But if you are uncertain where you should place the jack – or if you are unaware of the best way to support your vehicle properly, you should avoid taking matters into your own hands. It is recommended to check your owner’s manual for the best way to do it or have a professional mechanic take care of the job for you.
Read More: Dodge Dart Radio Not Working – Causes And Solutions
Wrap Up
By knowing the Dodge Ram ground strap locations, you can install new systems in your vehicle without any problem. This is why it is best to determine where exactly these ground straps are, which are in the areas we have shared in this post.
However, if you are still unsure, you can always consult your owner’s manual for a more definitive answer on these accurate locations. Or, you can have a specialist look into it on your behalf before you perform any installations to your vehicle.