While it may not happen too often, there are some people who encounter a conditions not correct for shift issue with their vehicle.
For instance, they have always been driving their vehicle normally, and then all of a sudden, there is a message that would show up stating this fault. In addition to this, the vehicle would not budge at all no matter how much power is still left on. The steering wheel cannot turn, and the message about the conditions not correct for shift shows up.
Unfortunately, it is not always very easy to deal with this when you are on the road and your vehicle just leaves you stranded. Of course, you can contact your dealership and have them resolve this issue for you.
But what can you do when you are several miles away from your dealership? Some people try to reboot it but without much luck. Yet, there are some things you can do in this situation – and this is what we will talk about today, so let’s get right into it.
Conditions Not Correct For Shift
As we have presented earlier, when you notice a message on your dashboard that says conditions not correct for shift, it may mean a few problems. For instance, your 12-volt battery is most likely to be undercharged. This is why some people find it helpful to have a battery minder, which is for coaxing their 12-volt battery back to its full charge.
In case this works, then you definitely still have a good battery, which means there is no need for you to replace it. But if this does not solve the problem, you will have to get your battery replaced since it is already faulty. Or you will have to get your dealer to check at a DC-DC module and see what can be done to your battery.
Another thing you can try is to disconnect your 12-volt battery for a few minutes. Some people who have encountered this issue with their vehicle have a dying battery before the conditions not correct for shift message has appeared.
Additionally, there is another instance that the battery is simply weak. You may have also done a startup timing issue, which means you shifted at the wrong time while your vehicle is still trying to startup. Hence, there may be a jam that has occurred causing some problems with shifting.
Now, there is also the possibility of having a hardware issue somewhere in your vehicle. But then if you think that the issue is not with a weak battery, then what you can try is to turn the vehicle off and turn it back on. Try doing this a few times and even exit the vehicle while closing the driver’s side door. In some cases, this should solve the problem.
With other people, it may mean turning off the vehicle and disconnecting the battery for a complete reset. Then, if the issue is just with the hardware or a 12-volt battery, a reboot may help.
But do keep in mind that if it is a software concern, which may have led to a soft lock in the control module, a quick way to trigger this problem is when your battery is in a low voltage condition. This can be a real concern especially if it is what can cause you to get stranded on the road.
But overall, it is most often due to a weak battery. So, if you experience this issue, the only thing left to do is to have your vehicle towed if you are still unable to start your car. You will need to get your 12-volt battery replaced and then it should be able to help solve the problem completely.
Summary
When the conditions not correct for shift warning appears, the last thing you should be doing is to continue driving your car. After all, this problem often leads to the shifting control being inactivated. This is why you are left with no choice but to contact your dealer and to have your vehicle towed.
Some people found success in rebooting their vehicle or disconnecting their 12-volt battery and reinstalling it. But if this does not work for you, make sure you contact your dealership to have the issue addressed by them sooner than later – and to get you out of the road fast.