Air leveling valve problems are often a cause of concern of many vehicle owners.
After all, you want to make sure that everything in your vehicle works perfectly fine. So, when you come across something in your car that goes wrong, then this puts you in a worried state.
So, if you are dealing with this issue, keep reading to learn more. We will delve on the reasons why this may happen and what you can do about it.
Causes Of Air Leveling Valve Problems
Perhaps you wonder why air leveling valve problems occur.
There are a number of reasons why this occurs and we will talk more about it below.
1. Breaking a line
The air line is responsible for delivering air from your valves to your bags. This may also deliver air from your tank and to your valves. The lines are made of a flexible type of tubing, and while these are generally easy to set up and install, there is always the possibility of it breaking.
So, if you drive your rig daily, it is best to bring with you some extra air line, as well as union tube connector fittings. It will also come in handy to have air line cutter tools and air line. In the event that the air line breaks, you need to make sure that your vehicle remains steady. Afterwards, cut the affected area out, then loop the new air line in with the use of your union tube connectors.
Add in some zip ties to keep it absolutely secured. This is only a temporary fix, though. You still need a more lasting solution but this quick fix can get you to your destination before a better solution is provided.
2. Blowing a bag
It is not typical for airbags to simply rupture. Yet, when they do, this is linked with a poor installation process. So, when you are stuck on the road, this can be a huge ordeal since you may not be able to lift the truck without special equipment.
But there are certain things you can try. Loosen the wheel’s lugs with the blown bag. Be sure to jack the vehicle up and keep it secure. Use your tools to get your bag out and then replace this part. But be sure to use a ziptie to keep it secure on your fittings. Lastly, reassemble.
Additional Things To Note
For obvious reasons, you cannot simply have a second setup for emergency cases. Yet, if you have some replacement components that you have with you, then you may use these. For example, if the valve breaks, then replace it with your spare valve. In case it is on the manifold, you may use a schrader valve, then manually lift this until you can reach your destination. You can also try to use an air compressor – a portable one – which comes in handy in such situations.
Obviously, you can never plan for absolutely everything. Yet, if you are able to follow these tips, you can be prepared for a number of situations.
Read More: 245 Vs 275 Tires – Key Differences You Need To Know
Bottom Line
Your air leveling valve is connected to your car’s frame. Then this connects to your suspension lower member using a signal link. With the rising and lowering of the suspension, your valve then analyzes the suspension’s height and adds or removes air from your air springs as needed.
This valve comes with an adjustable arm, which then goes down to your axle. This arm controls the ride height, which needs to stay constant whether unloaded or loaded. In case the valve you have has no defect, this must go back to the original height.
When problems exist, however, it is best to note the right solution and techniques to get these issues addressed appropriately. Then, you can ensure the proper operation of your air leveling valve and make sure that things work as they should. This also helps you maintain your peace of mind while driving and ensure the finest performance of your vehicle.