Ford Edge paint problems have come up in many conversations by Ford vehicle owners. So, if you are experiencing one, then you are most certainly not the only one.
In fact, this has been an issue that has been happening for quite some time now. This is why it is important to be aware of what this is all about and what you can do about it.
So, if you are looking to learn more about paint problems, or you would like to know what can be done about it, keep reading this post. We share with you all about these common issues with the Ford Edge paint and what other people are complaining about it, as well.
What Are Ford Edge Paint Problems
There are several frustrated owners of the Ford Edge that worry about the paint problems affecting their vehicle. Unfortunately, it also happens to other models such as the Ford Escape.
According to owners, the issue starts with a flaking paint job on the vehicle. This issue happens on the trunk hatch and then also the rear wheel wells of their vehicle. The paint not only flakes but rust also forms over time.
For others, they notice that after washing their car and polishing it, the paint appears to be peeling, particularly in their wheel wells. Unfortunately, when the warranty period has already lapsed, this would mean paying a higher price to get it fixed.
One other owner of a Ford vehicle saw that the paint had been peeling away right off the metal. The entire roof of the vehicle is curled up, which also caused the owner to be cautious – and even concerned – about washing it. They fear that a car wash could easily peel the flaking paint off.
Although the vehicle is a good one and quite reliable because of the robust motor, these paint problems need to be addressed. Otherwise, consumers will have to think twice before buying it because of these paint problems.
Then there is the issue with the rust appearing in the wheel well, which happens after the paint has peeled off. This is most definitely not a very appealing thing to see, which is why it may be necessary to take it to a paint shop for a paint overhaul.
In fact, even the inside of the panel shows some rust. This is not the kind of issue you want to deal with, most especially because of the steep cost of getting the paint done to the entire body of your vehicle.
Some auto manufacturers agree that the paint applied to the vehicles appears to be quite thin. This is why it is not surprising if it eventually peels off. Over the years, and when exposed to various external elements, the paint will certainly flake, peel, and rust.
More Issues With Ford Edge Paint Problems – How To Deal With Them
According to other owners, while waxing their vehicle, a small bubble appeared. Despite the fact that they were being cautious and careful with handling their vehicle, the paint just cracked. Considering the amount of money invested in their vehicle, having a less-than-perfect paint job and discovering such flaws can be quite disappointing and frustrating.
This is a manufacturer’s defect that is not helping with the manufacturer’s reputation.
When you notice that your paint is peeling and flaking, there are certain things you can do. The most common symptom is that the topmost layer of the paint is damaged. When you leave it untreated, the peeling will spread and leave the bare metal exposed to external elements such as moisture and heat. Then, oxidation can arise because of the daily wear and tear on the surface.
With this in mind, it is important to resolve the problem sooner than later.
If you are dealing with Ford Edge paint problems, there are a few steps you need to take.
1. Clean the affected area.
First, be sure to inspect the area to make sure that you know the extent of the fixing that needs to be done. Afterwards, wash the car well and get rid of any grime or debris.
2. Sand the area with peeled paint.
To make sure that there will not be any future peeling, you should get rid of the coat until the primer. Use a 1200-grit type of sandpaper. Ideally, the surface should be smooth and free from any paint. This way, you can restore it with primer, fresh paint, and a clear-coat.
3. Prime it.
When you spray right onto the metal, some problems can arise. It will be difficult for the paint to adhere to the surface. Thus, this will prevent the metal from being protected, which exposes it further to rust and other issues.
This is why you need to use a primer prior to painting the surface. By doing so, paint will stick to the surface while at the same time creating a protective and smooth layer for painting on it. Just be sure that the surface is clean and free from moisture prior to priming. A few coats of your primer should suffice when you want to cover your metal surface well.
4. Paint and clear-coat the surface.
After priming the surface, you can now repaint it. Be sure to use the right paint color that matches the old one. You may also want to apply a couple of paints to your primer and then the same amount of clear coat layers. This way, the result is flawless and just like the original paint.
Read More: Common Ford Active Grill Shutter Problems You Need To Know
Wrapping Up
Ford Edge paint problems can be a pain to deal with. Thankfully, there are a few things you can do to address the issue – even without the help of a specialist. We hope these steps have been helpful for you in ensuring the right result you want for your vehicle’s paint job.